Lens feet with larger 3/8" mounting holes require insertion of a 3/8" to 1/4" reducer bushing to fasten our plates using these holes.

Our Lens Plates attach with 1/4"-20 captive screws. This screw is used for lenses that may require more screws than are included in our products packaging. Also purchase if you need to replace a lost or damaged screw.

1/4-20 x 1/2" (.5) Custom Captive Hex Button Head Cap Screw (5/32" hex drive)

The SS-100 is used to mount lens plates to spotting scopes or telescopes.

1/4-20 x 7/16" (.44) Custom Captive Hex Button Head Cap Screw (5/32" hex drive)

This is a replacement combination head (5/32 hex/slotted) 1/4"-20 captive screw for our P-5 camera body plate. It may be driven with a hex key or if necesary, a smaller coin. This fastener will not function on our lens plates.

1/4-20 x 3/8" (.37) Custom Captive Button Head Cap Screw (5/32" hex/slot drive)

Special shorter safety stop Screw for the AP-500

M3 x 3mm Hex Socket Head Cap Screw (2.5mm hex drive)

Stop Screw for lens plates, replacement feet, and camera body plate.

M3 x 6mm Hex Socket Head Cap Screw (2.5mm hex drive)

Mounting screws fit our replacement feet. For replacement feet recommendations, please visit the replacement feet page.

M3 x 12mm Hex Socket Head Cap Screw (2.5mm hex drive)

Mounting screws fit our replacement feet. For replacement feet recommendations, please visit the replacement feet page.

M4 x 12mm Hex Socket Head Cap Screw (3mm hex drive)

For Replacement
Feet:
AP-609
AP-616

Mounting screws fit our replacement feet. For replacement feet recommendations, please visit the replacement feet page.

M4 x 14mm Hex Socket Head Cap Screw (3mm hex drive)

Mounting screws fit our replacement feet. For replacement feet recommendations, please visit the replacement feet page.

1/4-20 x 9/16"L Flat Head Socket Head Cap Screw (5/32 hex drive)

Mounting screws fit our replacement feet. For replacement feet recommendations, please visit the replacement feet page.

1/4-20 x 7/16"L Flat Head Socket Head Cap Screw (5/32 hex drive)

SW-SK100 - Sidekick Stop Screw ($3.00)  

This screw is not necessary on current sidekicks or if you are using an AK-100 Sidekick Safety Plate Adapter

This screw allows you to use one of the 1/4"-20 threaded holes in the sidekick as a safety stop. This was included in all Sidekicks manufactured from the Spring of 2017 until May 2018 when the sidekick was enhanced to include a built-in anodized dovetail plate with integrated safety stop.

It is available for those who wish to equip their earlier year sidekick with a safety stop.

Please check the compatibility chart below to see what ball heads work natively.

Download Product Instructions -                       Compatability Chart 

KY-PP-201 Plamp Thumbscrew Clip Tension Adjust Key  ($2.00)         

This tool is not necessary for normal use of the plamp.

The Plamp clip is designed to rotate relative to the articulating arm with slightly less resistance than is found between similar arm segments.

If you desire this resistance to be higher or lower, you may accomplish this by adjusting the Torx 20 mounting screw.

Download Product Instructions -

LL-PP-203 - 1/2" to 1/4" Loc-Line Adapter  ($4.00)         

This is a 1/2" Female to 1/4" Male Loc-line Fixed mount adapter

LL-PP-204-1420 - 1/2" Loc-Line Fixed Mount  ($5.00)         

This is a 1/2" Loc-line Fixed mount adapter with a brass female 1/4"-20 mounting socket.

LL-PP-204-T - 1/2" Loc-Line Fixed Mount  ($5.00)         

This is a 1/2" Loc-line Fixed mount adapter with 1/4" Through Hole. Includes 1/4-20 x 7/8" Stainless Steel fastener and EPDM rubber anti-rotation washer.

LL-PP-205 - 1/2" to (2) 1/4" Reducer Tee Loc-Line Adapter  ($4.00)   

This is a Female 1/2" Loc-line Rreducer Tee with two male 1/4" ends.

LL-PP-206 - 1/2" Magnetic Loc-Line Fixed Mount Base  ($15.00)         
This is a 1/2" Loc-line Fixed mount adapter attached to a heavy duty magnet.

LL-PP-207 - 1/2" Loc-Line with 1/4-20 Stud  ($15.00)         

This is a 1/2" Loc-line female adapter with Stainless Steel 1/4" Threaded Stud and anodized aluminum base.

PP-211 Plamp II Thumb Screw Clip  ($14.00)         

Retrofit your original Plamp I with the redesigned Plamp II clip. Connects to 1/4" Loc-line.

This is not compatible as a replacement clip for the current Plamp II. Please call if you need a replacement clip for your Plamp II.

Download Product Instructions -

PP-110 12" Plamp I Extension  ($5.00)         

For extending the reach for your Plamp I (Not Plamp II). Consists of 1/4" Loc-line.

Download Product Instructions -

PP-220 Plamp II Clamp  ($14.00)         

Replacement Clamp for your Plamp II.

Download Product Instructions -

PP-222 12" Plamp II Extension  ($8.00)         

For extending the reach for your Plamp II (Not Plamp I). Consists of 1/2" Loc-line.

Download Product Instructions -

PP-310 Plamp Ground Spike  ($10.00)         

The Ground Spike is a custom-designed screwdriver, designed specifically to serve as the anchor for the Plamp Stake. It's high-strength steel shank and ergonomic handle allows you to penetrate even the toughest ground without damaging it. A slotted screw allows you to adjust how tightly the handle fits into the socket of the Extension Tube. Ground spike can be used by itself or in conjunction with the Extension Tube to add more height.

Download Product Instructions -

PP-320 Plamp Extension Tube  ($9.00)         

A 12" rigid plastic tube with a flared end that fits snugly on the handle of the Ground Spike. Multiple extensions may be connected in series to achieve the desired height.
(Each one adds about 10" of height.)

Download Product Instructions -

CK-550 Soft-touch Knob Conversion Kit ($10.00)  

This kit allows you to replace the round tilt knob on older Sidekicks and Original Wimberley Heads with a 5-lobe, soft-touch knob.

*Not compatible for use as a replacement for new Sidekicks and WH-200s that already have 5 lobe soft-touch knobs. These knobs have a different thread pitch. If you need a replacement knob for these products or any other part, please contact us.

CK-200 Full Gimbal Conversion Kit ($229.00)  

This kit allows you to replace the quick-release clamp on the Sidemount Wimberley Head (WH-200-S) with the swinging arm and platform of the full gimbal Wimberley Head (WH-200). The Head can easily be converted back to the Sidemount version when desired by reversing the steps. 

The procedure is simple, and the only tool required is an included 5/32 hex key

Download Product Instructions -

CK-100 Sidemount Conversion Kit ($79.00)

The CK-100 kit allows you to replace the swing arm and platform of the Wimberley Head Version II (WH-200) with a side-mounted Wimberley quick-release clamp. This converts your full gimbal WH-200 to a Sidemount Wimberley Head, which is advantageous when weight and bulk need to be reduced. The Head can easily be converted back to the full gimbal when desired by reversing the steps.

SP-WH-001 Wimberley Gimbal Head Platform ($150.00)

The Wimberley Head Version II Platform attaches easily to the Gimbal Swing Arm. Can be purchased separately as a backup.

Download Product Instructions -

The KB-SS-041 is used on the M-4 and F-2 flash products

1/4-20 Knob

Dimensions are in Inches