Lens Plates---------------
P-10 ($52.00)
What's Included
|
P-10 ($52.00)
What's Included
Download P-10 Product Instructions -
*This specific lens has a shallow mounting hole which requires a special shorter mounting screw: |
P-20 ($52.00)
What's Included
|
P-30 ($55.00)
What's Included
|
P-30 ($55.00)
What's Included
Download P-30 Product Instructions -
*This specific lens has a shallow mounting hole which requires a special shorter mounting screw: |
P-35 ($56.00) What's Included |
5" long, 3 screws |
P-40 ($58.00)
What's Included
|
P-50 ($58.00)
What's Included
|
AP-452 ($79.00) What's Included LOW PROFILE Replacement Foot Dimensions (Overall L x W x H):
5.5 x 1.5 x .6 in |
|
|
|
|
|
AP-551 ($100.00) What's Included For Nikon: 180-400 f/4.0 TC 1.4 FL VR200-400 f/4.0 VR 300 f/2.8 VR (I & II) 500 f/4.0 VR FL Dimensions (Overall L x W x H):
5.1 x 1.7 x 1.5 in |
AP-552 ($75.00) What's Included For Nikon: 200 f/2.0 VR (I & II)Dimensions (Overall L x W x H):
5.5 x 1.5 x .5 in |
AP-554 ($100.00) What's Included For Nikon: 500 f/4 AF-S (I & II) and VR Dimensions (Overall L x W x H):
5.5 x 1.7 x 1.7 in |
The AP-553 Replacement Foot has been discontinued and replaced by our AP-554 Replacement Foot. However this product is still available for purchase AP-553 Replacement Foot What's Included For Nikon: 500 f/4 AF-S versions I & II, & VR200-400 f/4 AF-S VR Dimensions (Overall L x W x H):
5.7 x 1.5 x .9 in Download Product Instructions - This plate (AP-553) has been replaced by the AP-554, which provides a better handle to carry your lens by and is longer, allowing you to balance your lense with lighterweight camera bodies. However, we are still selling the AP-553 as a less expensive & lower profile option for those who have heavier camera bodies (see chart below for campatibility). If you meet the requirements of the compatibility chart below, and want the lowest profile and most ridgid plate possible this plate is a good choice. The AP-553 does not provide enough length for proper balance when using the certain light weight camera bodies (see chart below). If your lens/camera combo is not compatible, use the new AP-554 foot.
|
AP-554 ($100.00) What's Included For Nikon: 500 f/4 AF-S (I & II) and VR Dimensions (Overall L x W x H):
5.5 x 1.7 x 1.7 in |
AP-555 ($120.00) What's Included For Nikon: 400 f/2.8 FL VR Dimensions (Overall L x W x H):
6.75 x 1.7 x 1.5 in |
|
|
|
AP-602 ($79.00) What's Included LOW PROFILE Replacement Foot Dimensions (Overall L x W x H):
6.63 x 1.7 x .63 in Note: The IS version I uses the 4 screws from the existing This particular plate mounts so close to the lens that it is difficult to use the replacment foot as a handle |
AP-602 ($79.00) What's Included For Sigma: 500 f/4 DG OS HSM Dimensions (Overall L x W x H):
6.63 x 1.7 x .63 in |
AP-603 ($100.00) What's Included For Canon: 300 f/2.8 IS II200-400 f/4.0 IS 500 f/4.0 IS II 400 f/4.0 DO IS II Dimensions (Overall L x W x H):
4.8 x 1.7 x 1.4 in |
|
AP-604 ($110.00) What's Included For Canon: 400 f/2.8 IS (I & II)600 f/4.0 IS (I & II) Dimensions (Overall L x W x H):
5.9 x 1.7 x 1.7 in |
AP-606 ($75.00) What's Included For Canon: 200-800 RF f/6.3-9Dimensions (Overall L x W x H):
5.7 x 1.5 x 0.4 in |
AP-607 ($49.00) What's Included For Canon: 100-500 RF f/4.5-7.1
Dimensions (Overall L x W x H):
4.0 x 1.5 x 0.4 in |
AP-608 ($100.00) What's Included For Canon: 800 f/5.6 ISDimensions (Overall L x W x H):
6.1 x 1.7 x 1.3 in |
AP-608 ($100.00) What's Included For Sigma: 150-600 f/5.0-6.3 Sports Dimensions (Overall L x W x H):
6.1 x 1.7 x 1.3 in |
AP-609 ($79.00) What's Included For Sony: 400 f/2.8 GM OSSDimensions (Overall L x W x H):
4.7 x 1.6 x 0.7 in |
|
|
AP-616 ($79.00) What's Included Now Shipping For Sony: 600 f/4.0 GM OSS Dimensions (Overall L x W x H):
5.4 x 1.6 x 1.0 in |
AP-620 ($79.00) What's Included For Sony: 200-600 f/5.6-6.3 G OSS Dimensions (Overall L x W x H):
5.4 x 1.5 x 1.25 in |
AP-652 ($79.00) What's Included LOW PROFILE Replacement Foot Dimensions (Overall L x W x H):
5.5 x 1.5 x .6 in Lowers the overall height of the lens by about 1”. |
These spacer plates attach to the bottom of the Sidekick, offsetting it to accommodate larger lenses. Some lenses may require the use of spacers on the Sidekick and Sidemount for more efficient function. Check the lens plate recommendation chart to see if your lens requires this. Download Product Instructions -
|
These spacer plates attach to the bottom of the Sidekick, offsetting it to accommodate larger lenses. Some lenses may require the use of spacers on the Sidekick and Sidemount for more efficient function. Check the lens plate recommendation chart to see if your lens requires this. Download Product Instructions -
|
These spacer plates attach to the bottom of the Sidekick, offsetting it to accommodate larger lenses. Some lenses may require the use of spacers on the Sidekick and Sidemount for more efficient function. Check the lens plate recommendation chart to see if your lens requires this. Download Product Instructions -
|
These spacer plates attach to the bottom of the Sidekick, offsetting it to accommodate larger lenses. Some lenses may require the use of spacers on the Sidekick and Sidemount for more efficient function. Check the lens plate recommendation chart to see if your lens requires this. Download Product Instructions -
|
|
BS-100 - 3/8" to 1/4" Brass Reducer Bushing ($3.00) Lens feet with larger 3/8" mounting holes require insertion of a 3/8" to 1/4" reducer bushing to fasten our plates using these holes. |
|
SS-100 - Spotting Scope Screw ($1.00)
The SS-100 is used to mount lens plates to spotting scopes or telescopes. |
Wimberley, Inc. Order Inquiries: orders@tripodhead.com Phone: 1 (434) 529-8385 Business Hours: |
The "Arca-Swiss Style" Quick-Release Geometry The "Arca-Swiss Style" Quick-Release Geometry refers to the open-cavity dovetail quick-release system developed decades ago by Arca-Swiss for use with their Monoball ball heads and large format cameras. After the extreme popularity of the Arca-Swiss B-1 ball head in the 1990s, other companies began manufacturing custom camera-body and lens plates using this geometry. Since then, this geometry has become the industry standard for high-end tripod heads (particularly in the nature photography industry). The figure below shows the basic dimensions of the dovetail used in this system: |
|
The Wimberley Head Version II, Sidekick, and other clamps use this quick-release system, so any lens that you wish to connect to our heads must be equipped with an Arca-Swiss style lens plate or replacement foot. Manufacturers that use the Arca-Swiss Style Quick-Release Geometry include: |
|
Acratech Arca-Swiss Foba Giottos (only on their most recent line of ball heads & plates) Hejnar Jobu Kirk |
Markins Novoflex (only on some of their products) Promediagear Really Right Stuff Studioball Wimberley |
Dealer Service Levels As Ordered Dealer - Dealer orders Wimberley products when the customer places an order with the dealer. Dealer may drop ship orders to the customer through Wimberley as needed (USA only). Full Service Dealer - Dealer stocks at least one of each Wimberley product for immediate purchase. Dealer places orders in anticipation of low stock. Dealer has a store with regular business hours and provides a floor display and/or equipment to demonstrate Wimberley equipment. Limited Stock Dealer - Dealer carries a limited supply of popular Wimberley products on shelves and/or in their warehouse. Dealer may have to order less popular items upon customer request. Dealer may or may not have a Wimberley display in the store at this time (call dealer for details). Online Only Dealer - Dealer has an online store and stocks popular items as needed. Dealer does not have a brick-and-mortar retail store where customers can come and see the products prior to purchase. Dealer provides customer support by email and/or telephone. No Information Dealer - Dealer has not provided timely information on their current service level. Contact reseller for details on current stock status. |
Lens Plate Recommendations
For more information about this chart, click here.
Recommendation List
Click on a lens Manufacturer. Canon
Fuji
Hasselblad
Coming Soon Konica Minolta
Leica
Nikon
Olympus
Panasonic/Lumix
Pentax
Sigma
Sony
Tamron
Tokina
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
© Copyright 2017 - Wimberley, Inc. - All Rights Reserved
Made in USA and Assembled in Charlottesville, VA |
The charts above list the lens plate and additional hardware(if necessary) that we recommend for some of the most common collared lenses. If your lens is not on the list, please contact us and we will be happy to help you find the proper plate. A lens not listed has not been tested.
We try to suggest a plate that will work for all scenarios, but this is not always possible. The balance point of the lens/camera combination is affected by the weight of the camera body and other accessories attached to the lens and each set up is different.
The plates that we recommend should be long enough to:
1.) Properly balance the lens when using our gimbal heads
2.) Allow room to attach a flash bracket to the plate.
In some cases, this means that the plate is significantly longer than the foot of the lens.
NOTE: Other manufacturers' plates may not be long enough or dimensionally compatible in order to properly balance your setup. Check the length of the recommended plate in our charts for comparison. If your particular setup does not balance properly using our suggested plate, please contact us right away so that we can help you find a more suitable plate.
© Copyright 2020 - Wimberley, Inc. - All Rights Reserved
Made in USA and Assembled in Charlottesville, VA |