KY-PP-201 Plamp Thumbscrew Clip Tension Adjust Key  ($2.00)         

This tool is not necessary for normal use of the plamp.

The Plamp clip is designed to rotate relative to the articulating arm with slightly less resistance than is found between similar arm segments.

If you desire this resistance to be higher or lower, you may accomplish this by adjusting the Torx 20 mounting screw.

Download Product Instructions -

LL-PP-203 - 1/2" to 1/4" Loc-Line Adapter  ($4.00)         

This is a 1/2" Female to 1/4" Male Loc-line Fixed mount adapter

LL-PP-204-1420 - 1/2" Loc-Line Fixed Mount  ($5.00)         

This is a 1/2" Loc-line Fixed mount adapter with a brass female 1/4"-20 mounting socket.

LL-PP-204-T - 1/2" Loc-Line Fixed Mount  ($5.00)         

This is a 1/2" Loc-line Fixed mount adapter with 1/4" Through Hole. Includes 1/4-20 x 7/8" Stainless Steel fastener and EPDM rubber anti-rotation washer.

LL-PP-205 - 1/2" to (2) 1/4" Reducer Tee Loc-Line Adapter  ($4.00)   

This is a Female 1/2" Loc-line Rreducer Tee with two male 1/4" ends.

LL-PP-206 - 1/2" Magnetic Loc-Line Fixed Mount Base  ($15.00)         
This is a 1/2" Loc-line Fixed mount adapter attached to a heavy duty magnet.

LL-PP-207 - 1/2" Loc-Line with 1/4-20 Stud  ($15.00)         

This is a 1/2" Loc-line female adapter with Stainless Steel 1/4" Threaded Stud and anodized aluminum base.

PP-211 Plamp II Thumb Screw Clip  ($14.00)         

Retrofit your original Plamp I with the redesigned Plamp II clip. Connects to 1/4" Loc-line.

This is not compatible as a replacement clip for the current Plamp II. Please call if you need a replacement clip for your Plamp II.

Download Product Instructions -

PP-110 12" Plamp I Extension  ($5.00)         

For extending the reach for your Plamp I (Not Plamp II). Consists of 1/4" Loc-line.

Download Product Instructions -

PP-220 Plamp II Clamp  ($14.00)         

Replacement Clamp for your Plamp II.

Download Product Instructions -

PP-222 12" Plamp II Extension  ($8.00)         

For extending the reach for your Plamp II (Not Plamp I). Consists of 1/2" Loc-line.

Download Product Instructions -

PP-310 Plamp Ground Spike  ($10.00)         

The Ground Spike is a custom-designed screwdriver, designed specifically to serve as the anchor for the Plamp Stake. It's high-strength steel shank and ergonomic handle allows you to penetrate even the toughest ground without damaging it. A slotted screw allows you to adjust how tightly the handle fits into the socket of the Extension Tube. Ground spike can be used by itself or in conjunction with the Extension Tube to add more height.

Download Product Instructions -

PP-320 Plamp Extension Tube  ($9.00)         

A 12" rigid plastic tube with a flared end that fits snugly on the handle of the Ground Spike. Multiple extensions may be connected in series to achieve the desired height.
(Each one adds about 10" of height.)

Download Product Instructions -